WMF724 Fan-Assisted Storage Heater

Summary

• Price: Price on application, contact the agent for your state
• Location: QLD,ACT,VIC,TAS,SA,NSW

The ultimate in storage heating technology, the excellent controllability of the WMF range of heaters ideally suit family living rooms and lounges, where user control is most desired. By altering the room temperature control, you can select preferred comfort conditions. This is done by switching on the two-speed fan, drawing air through the heater core and discharging the heated air into the room through the low level outlet grille. By using the fan, the room temperature is increased very quickly. The room temperature sensor controls the operation of the fan until the preferred comfort conditions have been achieved, at which point the fan automatically switches off.

The heat retaining core is surrounded by enhanced insulation, giving low case emission which is sufficient to maintain a room at approximately 15 degrees Celsius, retaining more heat until a higher temperature is needed, resulting in greater heat controllability with increased efficiency.

A unique feature of an WMF heater is the boost element. If, for example during summer, the heater has been turned off and the weather turns unseasonably cold, the boost element can be turned on for instant heat. During normal operation, this element can only be activated when prolonged use of the fan has occurred, this avoids using electricity unnecessarily. WMF heaters have been specifically designed to ensure that maximum heat output is maintained at minimum cost.

Situated on top of the heater, controls regulate the stored heat input and fan-assisted output. Located on the side, the fan control can be switched to a high or low setting and the boost can be switched on when the fan is on high. The temperature control setting can be adjusted when the fan or fan/boost is activated.

The WMF724 model has a total height of 700mm and an input rating of 3.4kW.

Find out more about the WMF724 Fan Assisted Storage Heater by visiting the Derby website.

Features

• Exceptional user controllability.
• Instantaneous fan controlled heat output, allowing heat on demand.
• Built in room sensor controlling fan.
• Low case emission, retains heat until required later in the evening.
• Off peak storage heaters, heatbanks.